Screen-Length Disable - 3Com S7906E Command Reference Manual

screen-length disable

Syntax
screen-length disable
undo screen-length disable
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the screen-length disable command to disable the multiple-screen output function of the current
user.
Use the undo screen-length disable command to enable the multiple-screen output function of the
current user.
By default, a login user uses the settings of the screen-length command. The default settings of the
screen-length command are: multiple-screen output is enabled and 24 lines are displayed on the next
screen. (For the details of the screen-length command, refer to User Interface Commands in the
System Volume.)
Note that this command is applicable to the current user only and when a user re-logs in, the settings
restore to the system default.
Examples
# Disable multiple-screen output of the current user.
<Sysname> screen-length disable
super
Syntax
super [ level ]
View
User view
Default Level
0: Visit level
Parameters
level: User level, in the range 0 to 3, and defaults to 3.
1-19