Display Mpls Interface; Display Mpls Lsp - 3Com 8807 Command Reference Manual

682 C 39: MPLS B
HAPTER

display mpls interface

display mpls lsp

C C
ASIC ONFIGURATION OMMANDS
This command is used to the debug MPLS LSPM. As running the debugging will
affect the performance of the 3Com Switch 8800 Family Series Routing Switches,
you are recommended to use the command with caution.
Example
# Enable all MPLS VPN debugging.
<SW8800> debugging mpls lspm vpn
Syntax
display mpls interface
View
Any view
Parameter
None
Description
Use the display mpls interface command to view the information of all
MPLS-enabled interfaces.
Related command: display mpls lsp, display mpls statistics and display
static-lsp.
Example
# Display the information of all MPLS-enabled interfaces.
<SW8800> display mpls interface
MPLS interface information:
Interface Vlan-interface12 ( Label Range : 0-44800 )
Interface Vlan-interface23 ( Label Range : 0-44800 )
Interface Vlan-interface21 ( Label Range : 0-44800 )
Interface Vlan-interface20 ( Label Range : 0-44800 )
Interface Vlan-interface194 ( Label Range : 0-44800 )
Interface Vlan-interface104 ( Label Range : 0-44800 )
Interface Vlan-interface76 ( Label Range : 0-44800 )
Interface Vlan-interface22 ( Label Range : 0-44800 )
Interface Vlan-interface193 ( Label Range : 0-44800 )
Interface Vlan-interface27 ( Label Range : 0-44800 )
Syntax
display mpls lsp [ include text | verbose ]
View
Any view
Parameter
include text: Displays the matching string including the specified information.
verbose: Displays detailed information.