Display History-Command; Display Hotkey - 3Com S7906E Command Reference Manual

Save or display diagnostic information (Y=save, N=display)? [Y/N]:n

display history-command

Syntax
display history-command
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display history-command command to display commands saved in the history buffer.
The system will save validated history commands performed last in current user view to the history
buffer, which can save up to ten commands by default. You can use the history-command max-size
command to set the size of the history buffer. Refer to the history-command max-size command in
User Interface Commands in the System Volume for related configuration.
Examples
# Display validated history commands in current user view (the display information varies with
configuration).
<Sysname> display history-command
display history-command
system-view
vlan 2
quit

display hotkey

Syntax
display hotkey
View
Any view
Default Level
1: Monitor level
Parameters
None
1-10