Display Fan; Display Memory - 3Com S7906E Command Reference Manual

System temperature information (degree centigrade):
----------------------------------------------------
Board Temperature
1 43
2 50
3 56

display fan

Syntax
display fan [ fan-id ]
View
Any view
Default Level
1: Monitor level
Parameters
fan-id: Displays the operating state of the specified fan, where fan-id represents the built-in fan number.
The value varies with devices.
Description
Use the display fan command to display the operating state of built-in fans.
Examples
# Display the operating state of all fans in a device.
<Sysname> display fan
Fan 1 State: Normal
The above information displays all fans work normally.

display memory

Syntax
display memory [ slot slot-number ] [ cpu cpu-id ]
View
Any view
Default Level
1: Monitor level
Parameters
slot slot-number: Specifies the slot number of a board. The value range varies with devices.
cpu cpu-id: Display the memory of a specified CPU, where cpu-id represents the ID of the CPU.
Support for the cpu-id argument depends on the device model.
Lower limit Upper limit
20 70
0 80
0 80
1-10