Update Resident Lecs Address; Lsp: Set Resident Lecs Addr - 3Com CoreBuilder 9000 User Manual

Update Resident LECS
Address
Update the address of the resident LECS. Enter the user part of the
address (last 7 hex bytes). The switch network prefix is used for the first
13 bytes. The update takes place immediately.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
User part of LECS
address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 2 0.a0.3e.0.0.1.0
The following message is displayed:
Flash action completed successfully.
The resident LECS address is updated.
(2) LEM: LAN Emulation
(1) LCS: LE Config Service

(2) LSP: set resident LECS addr

Format or Range
7 Hex bytes separated with dots
2 1 2 [parameter]
The address of the resident LECS is updated. The
update takes place immediately.
Flash action completed successfully.
LECS Address 241