Loadsharing Enable - 3Com S7906E Command Reference Manual

Examples
# Display the electrical label information of the H3C customized anti-spoofing pluggable transceiver
plugged in interface GigabitEthernet 2/0/4.
<Sysname> display transceiver manuinfo interface gigabitethernet 2/0/4
GigabitEthernet2/0/4 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Table 1-9 display transceiver manuinfo command output description
Field
Manu. Serial Number
Manufacturing Date
Vendor Name

loadsharing enable

Syntax
loadsharing enable
undo loadsharing enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the loadsharing enable command to enable the load sharing function of the system.
Use the undo loadsharing enable command to disable the load sharing function of the system.
By default, the system load sharing function is disabled.
When the system load sharing function is enabled, the active SRPU and the standby SRPU share
the traffic that needs inter-board forwarding.
When the system load sharing function is disabled, only the active SRPU forwards the traffic that
needs inter-board forwarding.
: 213410A0000054000251
: 2006-09-01
: H3C
Serial number generated during debugging and testing of the
customized transceivers
Debugging and testing date. The date takes the value of the system
clock of the computer that performs debugging and testing.
Name of vendor who customizes the transceiver, that is, H3C.
1-20
Description