Display Clipboard - 3Com S7906E Command Reference Manual

When you configure the undo command-privilege view command, the value of the command
argument can be an abbreviated form of the specified command, that is, you only need to enter the
keywords at the beginning of the command. For example, after the undo command-privilege view
system ftp command is executed, all commands starting with the keyword ftp (such as ftp server
acl, ftp server enable, and ftp timeout) will be restored to the default level; if you have modified the
command level of commands ftp server enable and ftp timeout, and you want to restore only the ftp
server enable command to its default level, you should use the undo command-privilege view
system ftp server command.
If you modify the command level of a command in a specified view from the default command level
to a lower level, remember to modify the command levels of the quit command and the
corresponding command that is used to enter this view. For example, the default command level of
commands interface and system-view is 2 (system level); if you want to make the interface
command available to the users with the user privilege level of 1, you need to execute the following
three commands: command-privilege level 1 view shell system-view, command-privilege level 1
view system interface ethernet 2/0/1, and command-privilege level 1 view system quit, so that the
login users with the user privilege level of 1 can enter system view, execute the interface ethernet
command, and then return to user view.
Examples
# Set the command level of the interface command to 0 in system view.
<Sysname> system-view
[Sysname] command-privilege level 0 view system interface

display clipboard

Syntax
display clipboard
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display clipboard command to view the contents of the clipboard.
To copy the specified content to the clipboard:
Move the cursor to the starting position of the content and press the <Esc+Shift+,> combination
("," is an English comma).
Move the cursor to the ending position of the content and press the <Esc+Shift+.> combination
("." is an English dot) to copy the specified content to the clipboard.
Examples
# View the content of the clipboard.
1-6