SSANGYONG Rexton Y200 Manual page 1194

5D1-42 PART TIME - T/C
5. Tighten 9 bolts positioning identification tag and
wiring clip.
Installation Notice
Tightening Torque
6. Install the speed gear over output shaft spline in
the cover assembly.
7. Press the new oil seal into the cover assembly.
YAD5D920
External Electric Shift
1. Align the motor with shift shaft and position the
motor assembly onto the cover.
2. Install the motor to the shift shaft and contact
cover and rotate the motor clockwise direction to
check correct engagement.
YAD5D930
3. Insert the 0-ring on the speed sensor assembly to
the cover.
4. Install the bracket to the motor assembly and
tighten 3 bolts.
Installation Notice
Tightening Torque
YAD5D940
28 - 48 N•m
(21 - 35 lb-ft)
8 - 11 N•m
(71 - 97 lb-in)
SSANGYONG Y200