SSANGYONG Rexton Y200 Manual page 1192

5D1-40 PART TIME - T/C
Lockup Shift
1. Install the lockup hub and return spring to the
lockup collar and insert the snap ring.
2. Install the rail shaft through reduction shift fork
assembly previously installed and into the blind
hole in case.
3. Engage the lockup fork into the 2WD/4WD groove
and check operation.
4. Install the shift collar hub to the output shaft spline.
YAD5D880
5. Install the previously assembled electric shift cam
and assemble the clutch housing as follows.
•
Rotate the shift cam assembly to right so that
the end of the torsion spring contacts with
reduction shift fork side.
•
Holding the rail shaft, lift up the fork assembly
slightly.
Adjust electric shift cam assembly so that the
roller on reduction shift fork assembly is in
groove in shift cam and button on lockup fork
is on cam end.
•
Install the clutch housing over shift collar hub
YAD5D890 and insert the retaining ring into the clutch collar
hub groove.
SSANGYONG Y200