Default Metric (Bgp Router Configuration) - Dell N1100-ON Reference Manual

Default Configuration
By default BGP does not originate a default route. If a default route is
redistributed into BGP, BGP does not advertise the default route unless the
default-information originate command has been given. The always option is
disabled by default.
Command Mode
IPv6 Address Family Configuration mode
User Guidelines
Origination of the default route is not subject to a prefix filter configured
with the distribute-list out command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-router-af)#default-information originate

default metric (BGP Router Configuration)

This command sets the value of the Multi Exit Discriminator (MED)
attribute on routes redistributed into BGP when no metric has been specified
in the redistribute command.
Syntax
default-metric value
no default-metric
• value—The value to as the MED. The range is 1 to 4,294,967,295.
Default Configuration
By default, no default metric is set and no MED is included in redistributed
routes.
1239
Layer 3 Routing Commands