Default-Metric - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

default-metric

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1520
default-metric metric;
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id nssa
default-lsa],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id stub],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id stub],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id nssa default-lsa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id stub],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id stub],
[edit protocols (ospf | ospf3) area area-id nssa default-lsa],
[edit protocols (ospf | ospf3) area area-id stub],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id nssa
default-lsa],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
stub],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id nssa
default-lsa],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id stub],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id stub]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
On area border routers only, for a stub area, inject a default route with a specified metric
value into the area. The default route matches any destination that is not explicitly
reachable from within the area.
metric —Metric value.
Range: 1 through 16,777,215
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
nssa on page 1642
stub on page 1710
Configuring OSPF Areas