Removing The Set Clamp Shaft - Xerox workcentre 5335 series Service Manual

2
Slide the Gear, Spring and Bushing toward
the end of the Shaft
Figure 8 Preparing to remove the Set Clamp Shaft
17. Slide the Set Clamp Shaft to the front to clear the rear frame then slide the Shaft to the
rear and remove it from the Finisher
Repairs & Adjustments
REP 13.17
1
Unlock and remove
the Flag
(Figure 9).
BUS Updated 12/2011
Figure 9 Removing the Set Clamp Shaft
18. Remove the Compiler Tray Assembly
07/2011
4-154
1
Slide the
Shaft
toward
the front
2
Slide the Shaft toward
the rear and remove
(Figure 10).
Initial Issue
WorkCentre 5335 Family Service Documentation