Rep 12.11 Main Paddle Shaft Assembly - Xerox workcentre 5335 series Service Manual

REP 12.11 Main Paddle Shaft Assembly

Parts List on PL 22.5
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Compiler Assembly (REP
4. Remove the Gear (Figure 1):
(1)Remove E-Clip.
(2)Remove Gear.
(3)Remove KL-Clip.
(4)Remove Gear.
Figure 1 Removing the Gear
5. Remove the Gear Pulley (Figure 2):
(1)Remove E-Clip.
(2)Remove Gear.
(3)Remove Flange.
Repairs & Adjustments
REP 12.11
(REP 12.1).
12.20)
BUS Updated 12/2011
Figure 2 Removing the Gear Pulley
6. Remove the Bearing (Figure 3):
(1)Remove Bearing.
Figure 3 Removing the Bearing
7. Remove the Support Bearing from the Entrance Lower Chute Assembly
(1)Remove Self-tapping Screw.
(2)Remove Support Bearing.
07/2011
4-108
(Figure
Initial Issue
WorkCentre 5335 Family Service Documentation
4):