Rep 19.11 Hcf Pwb; Rep 19.12 Hcf Feed Motor - Xerox workcentre 5335 series Service Manual

REP 19.11 HCF PWB

Parts List on PL 10.8
Removal
1. Switch off the power and disconnect the power cord.
2. Un-dock the HCF (REP 19.3).
3. Remove the plastic Rear Cover.
• Remove the (4) securing screws.
4. Disconnect all of the connectors connected to the HCF PWB.
5. Remove the (4) screws securing the HCF PWB.
6. Remove the HCF PWB.
Replacement
1. To install, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 19.12 HCF Feed Motor

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Un-dock the HCF
3. Remove the plastic Rear Cover.
• Remove the (4) securing screws.
NOTE: Be careful when removing the motor as it is meshed to a hidden gear.
4. Supporting the motor with one hand, remove the HCF Feed Motor
• Disconnect the electrical Connector (1).
• Remove the (2) securing screws.
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-187
BUS Updated 12/2011
PL 10.1
(REP 19.3).
HCF Feed Motor
Figure 1 Removing the HCF Feed Motor
(Figure 1).
Repairs & Adjustments
REP 19.11, REP 19.12