Set Clamp Shaft Gear Orientation; Preparing To Remove The Set Clamp Shaft - Xerox workcentre 5335 series Service Manual

Figure 6 Set Clamp Shaft gear orientation
Initial Issue
WorkCentre 5335 Family Service Documentation
Notice
the orien-
tation of
the gears
on the
shaft
16. Slide the Gear, Spring and the Bushing away from the frame
07/2011
4-153
BUS Updated 12/2011
2
3
Slide the Gear away
Disconnect the Spring
from the frame
from the Gear
Figure 7 Preparing to remove the Set Clamp Shaft
1
Remove the E-ring
(Figure 8).
Repairs & Adjustments
REP 13.17