Rep 13.38 Booklet Stapler Move Motor (Office Finisher Lx) - Xerox workcentre 5335 series Service Manual

Stapler
Screws
Figure 4 Removing the Stapler
Replacement
1. Reverse the removal procedure for replacement.
2. Perform ADJ 12.2 Finisher LX Booklet Crease/Staple Position
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 13.38 Booklet Stapler Move Motor (Office Finisher LX)

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Booklet Maker Assembly from the Finisher
3. Remove the Cover for the Booklet Stapler Move Motor
(1) Remove the Screw (1).
(2) Remove the Cover.
Clip
Connector
4. Remove the Booklet Stapler Move Motor
(1) Open the Clip and release the wires.
(2) Disconnect the Connector.
(3) Remove the Screws (3).
(4) Remove the Booklet Stapler Move Motor.
07/2011
4-175
BUS Updated 12/2011
PL 23.18
Cover
Figure 1 Removing the Cover
(Figure 2).
(REP 13.31).
(Figure 1).
Screw
Repairs & Adjustments
REP 13.37, REP 13.38