Memory Failure Rap; Check Hdd Rap - Xerox Phaser 3635MFP Service Manual

03-600 Memory Failure RAP

03-600 The machine has detected a memory access failure.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 6. Perform the following:
1. Switch off the machine, then switch on the machine.
2. Remove, then reinstall the memory DIMM, PL 3.10 Item 10.
3. If necessary:
a. Install a new memory DIMM, PL 3.10 Item 10.
b. Perform OF7 Main PWB Check RAP.
Status Indicator RAPs
03-600, 03-800

03-800 Check HDD RAP

03-800 The machine has detected a fault with the hard disk drive (HDD).
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 5. Perform the following:
1. Switch off the machine, then switch on the machine.
2. Check the wiring between the hard disk drive and the Main PWB.
3. If necessary:
a. Install a new hard disk drive, PL 3.10 Item 16.
b. Perform OF7 Main PWB Check RAP.
2-12
WARNING
Phaser 3635MFP
Draft 4