Table of Contents
Advertisement
5.
Remove the Front Tray Cables
(Figure
1
Remove the E-Ring (1), Wire
guide (1), and Pulley (1)
2
Remove the Cables
Figure 10 Removing the Front Tray Cables
Repairs & Adjustments
REP 19.4
10,
Figure
11).
BUS Updated 12/2011
Figure 11 Front Tray Cable details
Replacement
1.
Install the front Tray Cable by carrying out the removal steps in reverse order.
2.
Install the rear Tray Cable by carrying out the removal steps in reverse order.
3.
Reinstall the HCF Tray's Front Cover.
a.
Make sure to raise the gear on the Indicator Shaft so that it meshes with the adjoin-
ing Lift Shaft gear.
b.
Replace the (5) Installation Screws.
4.
Reinstall the HCF Tray by lining up the rails of the tray with the adjoining rails of the HCF
and pushing the tray into place.
07/2011
4-182
Initial Issue
WorkCentre 5335 Family Service Documentation
Advertisement
Table of Contents
