Installing The Eject Roll Shaft Rear Parts - Xerox workcentre 5335 series Service Manual

Eject Roll Shaft in position
Figure 18 Preparing to install the Eject Roll Shaft
(2) Install the brass bearing, the Gear and the E-ring onto the rear of the Eject Roll
Shaft (Figure 19).
Initial Issue
WorkCentre 5335 Family Service Documentation
(3) Install the brass bearing and E-ring onto the front of the Eject Roll Shaft
20).
07/2011
4-159
BUS Updated 12/2011
Figure 19 Installing the Eject Roll Shaft rear parts
1
Install
the
brass
Bearing
2
Install the
Gear
3
Install the E-ring
(Figure
Repairs & Adjustments
REP 13.17