Adjustment
1.
Remove the DADF Rear Cover.
(Figure
2.
Adjust the position of the DADF by moving the DADF in direction A or B.
(1) Loosen the screws (x3).
(2) Move the DADF in direction A or B.
(3) Tighten the screws (x3).
Figure 2 DADF Rear Cover.
•
The DADF moved in direction A.
Repairs & Adjustments
ADJ 5.1
2)
(Figure
(Figure
3)
BUS Updated 12/2011
2)
•
The DADF moved in direction B.
3.
Reinstall the DADF Rear Cover.
4.
After adjustment, perform DADF Side Registration
istration.
(ADJ
5.4).
07/2011
4-190
Figure 3 Direction A
(Figure
4)
Figure 4 Direction B
(ADJ
5.2) and DADF Lead Edge Reg-
WorkCentre 5335 Family Service Documentation
Initial Issue