Xerox workcentre 5335 series Service Manual page 1232

Screw
Figure 2 Removing the Stapler Lower Cover
5. Remove the Chute (Figure 3).
(1) Remove the Screw (1).
(2) Remove the Chute.
6. Remove the Stapler Rear Cover (Figure
(1) Remove the Screws (2).
(2) Remove the Stapler Rear Cover.
Repairs & Adjustments
REP 13.37
Stapler Lower Cover
3).
BUS Updated 12/2011
Chute
Screw
Figure 3 Removing the Chute and Stapler Rear Cover
7. Remove the Stapler (Figure 4).
(1) Release the wires from the Clip.
(2) Disconnect the Connector.
(3) Remove the Screws (3).
(4) Remove the Stapler.
07/2011
4-174
Screws
Stapler
Rear Cover
Initial Issue
WorkCentre 5335 Family Service Documentation