Rep 12.17 Stacker Shaft Assembly - Xerox workcentre 5335 series Service Manual

Figure 4 Removing the Stacker Tray Assembly
Replacement
1. Reverse the removal procedure for replacement.
2. Install the Stacker Tray Assembly and Integrated Office Finisher as shown in
Figure 5 Installing the Stacker Tray Assembly
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 12.17 Stacker Shaft Assembly

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Rear Cover
4. Turn over the Integrated Office Finisher.
5. Remove the Tray Cover
6. Remove the rear Bracket
(1)Remove Screw.
(2)Remove Bracket.
Figure 5.
7. Remove the front Bracket
(1)Remove Screw.
(2)Remove Bracket.
07/2011
4-117
BUS Updated 12/2011
PL 22.8
(PL 22.1)
(PL 22.2)
(Figure 1):
Figure 1 Removing the Rear Bracket
(Figure 2):
(REP 12.1).
Repairs & Adjustments
REP 12.16, REP 12.17