Table of Contents
Advertisement
Figure 5 Aligning the Full Rate Carriage
11. Remove the alignment pin from the front of the Half Rate Carriage and install at the rear
of the Full Rate Carriage.
(Figure
installed.
(1) - Install the alignment pin.
(2) - Secure with a screw.
Repairs & Adjustments
ADJ 6.2
6). The rear tool for Half Rate Carriage remains
BUS Updated 12/2011
Figure 6 Position Adjustment of Full Rate Carriage
12. Align the front of the Full rate Carriage:
•
Loosen the securing screw of the Carriage Cable if necessary in order to align the
holes.
•
Remove the alignment pin from the rear of the Half Rate Carriage and install at the
front of the Full Rate Carriage.
•
Tighten the securing screw of the Carriage Cable
13. Slide the Full Rate Carriage to ensure that it moves smoothly.
14. Reinstall the Alignment Pins to their original positions.
15. Reinstall the Lens Cover Assembly to its original state.
16. Manually move the Full Rate Carriage to ensure that it moves smoothly.
07/2011
4-200
Initial Issue
WorkCentre 5335 Family Service Documentation
Advertisement
Table of Contents
