Rep 12.14 Upper Chute Assembly - Xerox workcentre 5335 series Service Manual

REP 12.14 Upper Chute Assembly

Parts List on PL 22.6
Removal
NOTE: The Integrated Office Finisher is available for use in several different machines. The
color of the Covers may be different from product to product, however, the repair procedures
are the same.
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Inner Front Cover (PL 22.1)
4. Remove the Rear Cover (PL 22.1)
5. Remove the Left Cover (PL 22.2)
6. Remove the Upper Frame Section (Figure
(1)Remove Screw and Bracket.
(2)Remove Screws (2).
(3)Remove Screw and Bracket.
(4)Remove Screws (2).
(5)Remove the Upper Frame Section
Repairs & Adjustments
REP 12.14
(REP 12.1).
1):
BUS Updated 12/2011
Figure 1 Removing the Upper Frame Section
NOTE: The screws do not thread into the Upper Chute. They are used like pins to secure
the Upper Chute in place.
7. Remove the Upper Chute Assembly
(1)Remove Screws (2).
(2)Remove Screw.
(3)Carefully Remove the Upper Chute Assembly.
07/2011
4-114
(Figure 2):
Initial Issue
WorkCentre 5335 Family Service Documentation