Xerox workcentre 5335 series Service Manual page 1170

(2)Remove Gear.
(3)Remove Pulley from Belt.
(4)Remove Flange.
Figure 4 Removing the Gear Pulley
10. Remove the Bearing (Figure 5):
(1)Remove the Bearing.
Figure 5 Removing the Bearing
11. Remove the Entrance Lower Chute Assembly
(1)Remove Screws (2).
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 6):
07/2011
BUS Updated 12/2011
(2)Loosen Screws (2).
(3)Remove Entrance Lower Chute Assembly.
Figure 6 Removing the Entrance Lower Chute Assembly
Replacement
1. Reverse the removal procedure for replacement.
4-111
Repairs & Adjustments
REP 12.12