Rep 13.16 Finisher Stapler Assembly (Office Finisher Lx) - Xerox workcentre 5335 series Service Manual

Cable Clamp
Connector
Stapler Motor
Figure 3 Removing the Stapler Motor
Replacement
1. Reverse the removal procedure for replacement.
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 13.16 Finisher Stapler Assembly (Office Finisher LX)

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Creaser Knife Assembly
3. Remove the Front Cover Assembly
4. Remove the Stapler Cover
(1) Remove the Screw.
(2) Remove the Stapler Cover.
Screws
5. Remove the Finisher Stapler Assembly
(1) Disconnect the Connectors (2).
(2) Remove the Screws (3).
(3) Remove the Finisher Stapler Assembly.
07/2011
4-149
BUS Updated 12/2011
PL 23.8
(REP 13.18).
(REP 13.6).
(Figure 1).
Figure 1 Removing the Stapler Cover
(Figure 2).
Stapler
Cover
Screw
Repairs & Adjustments
REP 13.15, REP 13.16