Rep 12.8 Pinch Roll - Xerox workcentre 5335 series Service Manual

Figure 3 Removing the Exit Roll Assembly
Replacement
1. Reverse the removal procedure for replacement.
NOTE: Ensure that the Paper Guides on the Upper Chute
on top of the Exit Roll Assembly.
Repairs & Adjustments
REP 12.7, REP 12.8

REP 12.8 Pinch Roll

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Compiler Assembly
4. Remove the Pinch Roll
(1)Raise Springs (4) in the direction of the arrow.
(2)Remove Pinch Rolls (4).
Replacement
1. Reverse the removal procedure for replacement.
(PL 22.6) are not folded back
07/2011
4-104
BUS Updated 12/2011
PL 22.5
(REP 12.20)
(Figure 1):
Figure 1 Removing the Pinch Rolls
WorkCentre 5335 Family Service Documentation
(REP 12.1).
Initial Issue