Rep 13.10 Foot Cover (Office Finisher Lx) - Xerox workcentre 5335 series Service Manual

4. Make sure the Latch Hook and Latch Pin are positioned as shown
Latch Hook
Figure 5 Positioning the Latch Hook and Latch Pin
5. Install the Retaining Screw (1) (Figure
Retaining Screw
Figure 6 Installing the Retaining Screw
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 5).
Latch Pin
6).
BUS Updated 12/2011

REP 13.10 Foot Cover (Office Finisher LX)

Parts List on PL 23.6
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Screw (1) (Figure
3. Remove the Foot Cover.
Foot Cover
Screw
Figure 1 Removing the Foot Cover
Replacement
1. Reverse the removal procedure for replacement.
07/2011
4-145
1).
Repairs & Adjustments
REP 13.9, REP 13.10