Xerox workcentre 5335 series Service Manual page 1177

Figure 2 Removing the Front Bracket
8. Remove the Top Tray (Figure 3):
(1)Raise Integrated Office Finisher slightly in the direction of the arrow.
(2)Remove Top Tray.
Figure 3 Removing the Top Tray
9. Disconnect Connector (Figure 4):
(1)Release Clamps (5) and remove the wire.
(2)Release Wire from Hook.
(3)Disconnect Connector.
Repairs & Adjustments
REP 12.17
10. Remove the Stacker Sensor Assembly
(1)Remove Screw.
(2)Remove Stacker Sensor Assembly.
(3)Remove Wire from Clamps (5)
11. Remove the Stacker Assembly
07/2011
4-118
BUS Updated 12/2011
Figure 4 Disconnecting the Connector
(Figure 5):
Figure 5 Removing the Stacker Sensor Assembly
(Figure 6):
WorkCentre 5335 Family Service Documentation
Initial Issue