HP ProCurve 7102dl Reference Manual page 1079

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

backup connect-timeout <seconds>

Use the backup connect-timeout command to specify the number of seconds to wait for a connection

after a call is attempted before trying to call again or dialing a different number. It is recommended this

number be greater than 60. For more detailed information on backup functionality, refer to the Functional

Notes section of the command backup call-mode <role> on page 1073.

Syntax Description

Default Values

By default, the backup connect-timeout period is set to 60 seconds.

Usage Examples

The following example configures the SROS to wait 120 seconds before retrying a failed backup call:

ProCurve(config)#interface ppp 1

ProCurve(config-ppp 1)#backup connect-timeout 120

Selects the amount of time (in seconds) that the router will wait for a connection

before attempting another call (valid range: 10 to 300).

PPP Interface Configuration Command Set

Chapters

Table of Contents