HP ProCurve 7102dl Reference Manual page 1072

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

PPP Interface Configuration Command Set

backup auto-backup

Use the backup auto-backup command to configure the PPP interface to automatically attempt a backup

upon failure. For more detailed information on PPP backup functionality, refer to the Functional Notes

section of the command backup call-mode <role> on page 1073.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically attempt backup upon a failure.

Usage Examples

The following example enables automatic backup on the endpoint:

ProCurve(config)#interface ppp 1

ProCurve(config-ppp 1)#backup auto-backup

Chapters

Table of Contents