Analog 2Mc Specifications - NEC Univerge sv8500 Manual

Analog 2MC
Analog 2MC has an RJ-45 Jack (for LAN connection) and a total of two modular jacks (Port 0 and Port 1) for
a maximum of two Analog Telephone/Fax (G3) terminals. In addition, it provides the following features:
a. Voice Data Processing
• Voice Data Compression/Decompression
• Echo Canceller
• Tone Generator
• Fax Data Encoding/Multiplexing
• PAD Controlling
• DTMF Detection/Generation
b. IP Network Interface (10/100 Mbps Ethernet Interface to send/receive Voice and Signal Information)
c. Serial Interface for connecting a PC.
4.1.2 Specifications
The specifications for Analog 2MC are listed in the table below.
FUNCTION
Input Power
Maximum Power Consumption
Voice CODEC
FAX
VLAN
Echo Canceller

Analog 2MC Specifications

SPECIFICATION
AC 100-240 V
[Rated value]
AC100V 0.6A
AC120V 0.5A
AC240V 0.3.A
G.711
G.729a
G.723.1
Data transmission as voice data
FAX Relay (T.30)
Note 1
IEEE 802.1Q (Tagging VLAN),
VLAN bit, Priority bit
G.168 (NLP function available)
VOL.2-47
Analog 2MC (Analog Media Converter)
NOTE
Internal power is generated from DC –48V to
each power supply.
µ
64 k (bps): PCM -law/A-law
8 k (bps): CS-ACELP
6.3 k (bps): MP-MLQ/ACELP
5.3 k (bps): MP-MLQ/ACELP
G.711/G.726 (ADPCM)
G3 FAX (V.17, V.21, V.27ter, V.29, V.33):
Available Note 2
Super G3 (V.34, etc.): Not available Note 3
Tail Length is 25 milliseconds