NEC Univerge sv8500 Manual page 298

Fax Connection
Fax data transmission can be selected according to the network configuration. The transmission type is deter-
mined by the connection route, whether the data are transferred to destination node via COT, DTI, ODT, PRT
or IPTRK card to PSTN/Private Line (TDM-based) from the IP network, and also whether voice compression
device is accommodated. The figure below shows a network configuration example.
[MC-MC connection, and MC-LC connection via IPPAD (including CCIS)]
IPPAD
Analog
2MC
FAX
FAX communication within Analog 2MC
FAX communication within self-node
FAX communication through CCIS over IP
For detailed procedure and data assignment for Fax connections, refer to [I-44] IP Control-FAX service
Note:
in Data Programming Manual.
LC
IP Network
FAX
Analog
2MC
FAX
VOL.2-45
Analog 2MC (Analog Media Converter)
LC IPPAD
FAX
FAX
Analog
2MC