NEC Univerge sv8500 Manual page 1685

set cc_convert:
Country Code convert
-------------------------------------------------
set check_number:
telephone-number check function
-------------------------------------------------
set out_of_area_code:
Response code when out of area
-------------------------------------------------
set sdp_style:
SDP style setting
G729 annexb=no
-------------------------------------------------
set call_id_relay:
Call-ID relay mode
-------------------------------------------------
set sip_accfilter:
:disable
:disable
:408(default)
:RFC4566
:enable
:disable
VOL.2-1432
MG-SIP128 [MG-128SIPMGG]
When "enable" is selected by the
SET command "cc_convert",
"enable" is displayed.
When "enable" is selected by the
SET command "check_number",
"enable" is displayed.
The number for a response code
set by the SET command
"out_of_area_code" is displayed.
When "normal" is selected by the
SET command "sdp_style", "nor-
mal" is displayed.
When "disable" is selected by the
SET command "sdp_style", "dis-
able" is displayed.
When "enable" is selected by the
SET command "call_id_relay",
"enable" is displayed.