5
Operation
5.1
Access Via PC (ToolKit)
Version
5.1.1
Install ToolKit
Load from CD
Fig. 107: Product CD - HTML menu
Fig. 108: HTML menu section 'Soft‐
37535B
The easYgen can be operated, monitored and configured using the
following access methods:
Access via the front panel
n
Ä Chapter 5.2 "Front Panel Access" on page 340
External access with a PC using the ToolKit configuration soft‐
n
ware.
Ä Chapter 5.1.1 "Install ToolKit" on page 331
External command access using Modbus/CANopen/J1939 pro‐
n
tocols
Ä Chapter 7 "Interfaces And Protocols" on page 451
Woodward's ToolKit software is required to access the
unit via PC.
Required version: 4.1.1 or higher
–
For information on how to obtain the latest version
–
see Ä "Load from the website" on page 332.
1.
Insert the product CD (as supplied with the unit) in the CD-
ROM drive of your computer.
ð The HTML menu is opened automatically in a browser.
2.
Go to section
described there.
ware'
easYgen-2200/2500 | Genset Control
Access Via PC (ToolKit) > Install ToolKit
The 'autostart' function of your operating
system needs to be activated.
Alternately open the document "start.html" in
the root directory of the CD in a browser.
"Software" and follow the instructions
Operation
331