Standard Menu Screens; Navigation Screens; Status/Monitoring Screens - Woodward easYgen-2000 Series User Manual

Operation
Front Panel Access > Standard Menu Screens > Status/Monitoring Screens
5.2.3

Standard Menu Screens

5.2.3.1

Navigation Screens

Fig. 120: Navigation screen (example)
5.2.3.2

Status/Monitoring Screens

Fig. 121: Status/Monitoring screen
346
Navigation screens offer access to sub-menu screens via the dis‐
played softkey.
Navigation screens:
Main Menu
n
Measured values
n
J1939 Interface
n
Diagnostic
n
Miscellaneous
n
Parameter
n
System Manaegment
n
Press the desired softkey to change to a sub-menu screen.
Status/Monitoring screens display monitored values or set parame‐
ters.
Status/Monitoring
screen
Analog inputs/outputs
(example)
Discrete inputs/outputs
Counters and service
easYgen-2200/2500 | Genset Control
The following chapters list standard menu screens,
where all user input is handled similarly.
For information on standard softkeys and status sym‐
bols refer to Ä Chapter 5.2.2 "Basic Navigation"
on page 341.
For information on all other menu screens refer to
Ä Chapter 5.2.4 "Specialised Menu Screens"
on page 347.
Sub-menu entries are only displayed if the
required or a higher code level is set.
Notes
The analog outputs are displayed as a percentage of
the selected hardware range, i.e. 50 % of a 0 to 20
mA output refer to 10 mA.
The configured logic for the discrete input "N.O./N.C."
will determine how the easYgen reacts to the state of
the discrete input.
If the respective DI is configured to N.O., the unit
reacts on the energized state, if it is configured to
N.C., it reacts on the de-energized state.
For additional information on setting/resetting coun‐
ters refer to Ä Chapter 4.8 "Configure Counters"
on page 327 .
37535B