Group 10: Analog Inputs; Group 11: Clock And Timer - Woodward easYgen-2000 Series User Manual

Appendix
LogicsManager Reference > Logical Command Variables > Group 11: Clock And Timer
9.4.4.11

Group 10: Analog Inputs

No. ID
10.01 559
10.02 560
10.03 561
10.04 562
9.4.4.12

Group 11: Clock And Timer

No. ID
11.01 579
11.02 580
11.03 581
11.04 582
11.05 583
11.06 584
11.07 585
11.08 586
572
Analog inputs
n
Logic command variables 10.01-10.04
n
The analog inputs may be used as command variable in a logical
output.
Name / Function
Analog input AI 01 wire break
Analog input AI 02 wire break
Analog input AI 03 wire break
Analog input AI 04 wire break
Clock and timer
n
Logic command variables 11.01-11.10
n
Time functions may be used as command variable in a logical
output.
Name / Function
Timer setpoint 1 (exceeded)
Timer setpoint 2 (exceeded)
Active weekday (equal to setting)
Active day (equal to setting)
Active hour (equal to setting)
Active minute (equal to setting)
Active second (equal to setting)
Engine (running hours exceeded by) 1 hour
easYgen-2200/2500 | Genset Control
Note
TRUE = measured value
out of range
FALSE = logical "0"
(alarm has been
acknowledged, or imme‐
diately after TRUE con‐
dition is not present any‐
more, if Control is
configured as alarm
class)
Note
Refer to parameter
1652 Ä p. 325,
1651 Ä p. 325 and
1650 Ä p. 325.
Refer to parameters
1657 Ä p. 325,
1656 Ä p. 325 and
1655 Ä p. 325.
Refer to parameter
1663 Ä p. 325.
Refer to parameter
1663 Ä p. 325.
Refer to parameter
1662 Ä p. 325.
Refer to parameter
1661 Ä p. 326.
Refer to parameter
1660 Ä p. 326.
Status changes every
operating hour
37535B