5.1.3
Configure ToolKit
Fig. 111: Tools menu
Fig. 112: Options window
A File locations
B Language setting for tools
5.1.4
Connect ToolKit
Standard connection
37535B
To change ToolKit settings:
"Tools è Options" .
1.
Select
"Options" windows is displayed.
ð The
2.
Adjust settings as required.
For more information on the individual settings
refer to the ToolKit online help.
ð Changes take effect after klicking
Please do not change the default installation folder!
Otherwise the language selection will not work prop‐
erly.
To connect ToolKit and the easYgen unit:
1.
The USB/RS-232 serial interface is only provided
via the optional Woodward DPC (direct configu‐
ration cable), which must be connected to the
service port.
–
Plug the DPC cable into the service port. Use a USB cable/
null modem cable to connect the USB/RS-232 serial port of
the DPC to a serial USB/COM port of the PC with.
If the PC does not have a serial port to connect
the null modem cable to, use a USB to serial
adapter.
2.
Open ToolKit from the Windows Start Menu path
Woodward è ToolKit 3.x" .
è
3.
From the main ToolKit window, select
"Open Tool" icon
click the
4.
Locate and select the desired tool file (*.WTOOL) in the
ToolKit data file directory and click
easYgen-2200/2500 | Genset Control
Access Via PC (ToolKit) > Connect ToolKit
"OK" .
For additional information refer to
Ä Chapter 3.2.15 "Service Port" on page 79.
"File è Open Tool..."
on the tool bar.
"Open" .
Operation
"Programs
335