Woodward easYgen-2000 Series User Manual page 324

Configuration
Configure LogicsManager
Internal flags
Flag {x} Flag 1
Parameter 12230
ID yyyyy
Table 58: Flag parameter IDs (1 to 8)
Flag {x} Flag 9
Parameter 12910
ID yyyyy
Table 59: Flag parameter IDs (9 to 16)
Timers
324
Internal flags within the LogicsManager logical outputs may be pro‐
grammed and used for multiple functions.
Flag 2 Flag 3
12240 12250
Flag 10 Flag 11
12911 12912
easYgen-2200/2500 | Genset Control
The flag parameters are listed as one entry in the
parameter table below. For the parameter IDs of each
individual flag parameter refer to Ä "Flag parameter
IDs (1 to 8)" Table on page 324.
Flag 4 Flag 5
12260 12270
Flag 12 Flag 13
12913 12914
For conditions and explanation of programming please
refer to Ä Chapter 9.4.1 "LogicsManager Overview"
on page 549.
Daily time setpoints
Utilizing the LogicsManager it is possible to establish
specific times of the day that functions (i.e. generator
exerciser) can be enabled.
The two daily time setpoints are activated each day at
the configured time. Using the LogicsManager these
setpoints may be configured individually or combined
to create a time range.
Active time setpoint
Utilizing the LogicsManager it is possible to establish
specific days (or hours, minutes, seconds) that func‐
tions (i.e. generator exerciser) can be enabled. The
active switching point is activated only on a specified
day (or hour, minute, second).
The setpoints may be configured individually or com‐
bined via the LogicsManager. You may configure
monthly, daily, hourly, minutely, or even secondly time
setpoints depending on how you combine the setpoints
in the LogicsManager.
Flag 6 Flag 7
12280 12290
Flag 14 Flag 15
12915 12916
Flag 8
12300
Flag 16
12917
37535B