Woodward easYgen-2000 Series User Manual page 464

Interfaces And Protocols
J1939 Protocol > Supported J1939 ECUs & Rem...
Remote 1 2
control
parameter
Idle Mode No Yes
50/60 Hz Yes Yes
switch
Speed bias Yes Yes
offse
t
Preglow No No
Override No Yes
Engine No No
power mode
Engine No No
selected
application
464
3 4 5 6 7
Yes Yes No
No 1 No
No No Yes
Yes No
2
Yes Yes Yes Yes Yes
abso offse abso abso
lute t lute lute
No Yes Yes No No
No Yes No Yes No
No No No No No
No No No No No
easYgen-2200/2500 | Genset Control
8 9 10
No / No Yes
1 No 1
No No / No Yes
1
Yes Yes / Yes
Yes
abso
lute
No No / No No
Yes No / No Yes
No No No
No No No
Please contact manufacturer to clarify whether both
1
frequencies (50/60 Hz) may be controlled by the speed
bias.
In case the rated speed of the easYgen and the ECU
2
don't match, please make sure that the CAN connec‐
tions works and change parameter
easYgen once.
11 Comment
Yes This J1939 bit information is set, if
"Idle" mode is active (LogicsMan‐
ager command variable 04.15.
"Idle run active" is TRUE).
The bit will be reset, if "Idle" mode
is no longer active (LogicsMan‐
ager command variable 04.15.
"Idle run active" is FALSE).
Yes The J1939 information for 50 or
60 Hz mode is sent to the ECU
depending on the "Rated system
frequency" parameter setting
(1750 Ä p. 94) within the
easYgen .
Yes Refer to parameter 5537 Ä p. 320
for detailed information.
No This J1939 bit information is set, if
the easYgen is in "Preglow" mode
(LogicsManager command vari‐
able 03.04. "Preglow/Ignition" is
TRUE).
The bit will be reset, if the "Pre‐
glow" phase has been expired or
aborted.
Yes This J1939 bit information is set, if
the easYgen is in critical mode
(LogicsManager command vari‐
able 04.27. "Critical mode" is
TRUE).
The bit will be reset, if the critical
mode has been expired or
aborted.
Yes This message is generated
according to parameter "ECU
power mode" (parameter
12939 Ä p. 322).
Yes This message is generated
according to parameter "ECU
application" (parameter
4843 Ä p. 322).
1750 Ä p. 94 of the
37535B