Woodward easYgen-2000 Series User Manual page 580

Appendix
LogicsManager Reference > Factory Settings
Simple (function)
If TRUE the unit changes into STOP operating
mode.
Deactivated by default.
[00.19] Start without load
If TRUE, the engine is started without load
transfer to the generator (closing the GCB is
blocked).
Deactivated by default.
[00.20] Automatic Idle mode
If TRUE, the control performs an idle run for a
configured time at start-up.
Deactivated by default.
Note
This function is pre-configured and may be acti‐
vated by passing through the command variable
[00.09] Start req. in Auto ('―' instead of '0').
[00.21] Raise frequency/load setpoint
If TRUE, the frequency/load setpoint will be
raised.
Deactivated by default.
[00.22] Lower frequency/load setpoint
If TRUE, the frequency/load setpoint will be low‐
ered.
Deactivated by default.
[00.23] Raise voltage/power factor setpoint
580
Extended (configuration)
easYgen-2200/2500 | Genset Control
Result
FALSE
FALSE
FALSE
FALSE
FALSE
37535B