Application
Modbus Applications > Remote Control > Remotely Changing The Setp...
Example
432
The active power setpoint 2 is to be enabled.
Modbus address = 40000 + (Par. ID + 1) = 40505
n
Modbus length = 1 (UNSIGNED 16)
n
To set the bits in ModScan32:
Fig. 212: ModScan32 single bit view
1.
Using the "display options" set the format to binary to view
single bits (Fig. 212).
easYgen-2200/2500 | Genset Control
37535B