3
Installation
3.1
Mount Unit (Plastic Housing)
Dimensions (easYgen-2200)
37535B
Mount the unit either using the clamp fasteners (
"Clamp Fastener Installation" on page 33 ) or the screw kit
Ä Chapter 3.1.2 "Screw Kit Installation" on page 34 ).
(
Don't drill holes if you want to use the clamp fas‐
–
teners. If the holes are drilled into the panel, the
clamp fasteners cannot be used anymore.
Some versions of the plastic housing are not
–
equipped with nut inserts and may not be fastened
with the screw kit.
In order to enhance the protection to IP 66, fasten
–
the unit with the screw kit instead of the clamp fas‐
tener hardware.
Fig. 6: Plastic housing - dimensions (easYgen-2200)
easYgen-2200/2500 | Genset Control
Installation
Mount Unit (Plastic Housing)
Ä Chapter 3.1.1
31