Woodward easYgen-2000 Series User Manual page 343

Group Softkey
Navigation
37535B
Caption
Decrease Value
Confirm Input
Alarm Seen
Acknowledge Message
Reset Value Display
Lamp Test
Open Breaker
Close Breaker
Start Generator
Stop Generator
Move Up
Move Down
Move Cursor Position
Return
Select Parameter
Alarm Screen
Help Screen
easYgen-2200/2500 | Genset Control
Front Panel Access > Basic Navigation
Description
Decrease selected value.
Confirm and store changed value.
Only displayed if the Alarm LED is flashing (indicating an alarm is
present, which has not yet been acknowledged as 'Seen').
Resets the horn and acknowledges an alarm as 'Seen'.
Acknowledge/Delete message/event.
Reset the maximum value display.
Reset the blink code (J1939 Special Screen).
Perfom a lamp test.
Open mains/generator breaker (MANUAL mode).
Close mains/generator breaker (MANUAL mode).
Start generator (MANUAL mode).
Stop generator (MANUAL mode).
Select previous value/entry.
Select next value/entry.
Move cursor position
Return to previous menu.
Select a parameter (LogicsManager).
Show alarm screen.
Show help screen
Operation
343