Woodward easYgen-2000 Series User Manual page 225

ID Parameter
5202 PWM signal
5216
5210 PWM output
level
5224
Setting ranges
37535B
CL Setting range Description
[Default]
Example
f the value configured here is 75 %, the maximum output range of +/-20 mA /
+/-10 V has a upper limit of 10 mA / 5 V.
2 On A PWM signal will be output on the respective analog output.
[Off] An analog signal will be output on the respective analog output.
Notes
The amplitude of the PWM signal to be utilized is configured in "PWM output
level" (parameter
The PWM signal will also be limited by parameter
5201 Ä p. 224/5215 Ä p. 224
and
is user defined.
2 0.00 to 10.00 V
If PWM has been enabled in parameter
level of the PWM signal may be adjusted here.
[10.00 V]
Type
Current
Voltage
easYgen-2200/2500 | Genset Control
Configure Application > Analog Outputs 1/2
5210 Ä p. 225).
or parameters
5209 Ä p. 224/5223 Ä p. 224
Setting in parameter Jumper
5201/5215 neces‐
sary
+/-20mA (+/-10V) no
+/-10mA (+/-5V)
0 to 10mA (0 to 5V)
0 to 20mA (0 to 10V)
4 to 20mA
10 to 0mA (5 to 0V)
20 to 0mA (10 to 0V)
20 to 4mA
User defined
+/-20mA (+/-10V) yes
+/-10mA (+/-5V)
+/-3V
+/-2.5V
+/-1V
0 to 10mA (0 to 5V)
0.5V to 4.5V
0 to 20mA (0 to 10V)
10 to 0mA (5 to 0V)
4.5V to 0.5V
Configuration
5208 Ä p. 224/5222 Ä p. 224
if parameter 5201 Ä p. 224/5215 Ä p. 224
5203 Ä p. 224/5217 Ä p. 224
Range Lower
level
+/-20mA -20 mA
+/-10mA -10 mA
0-10mA 0 mA
0-20mA 0 mA
4-20mA 4 mA
10-0mA 10 mA
20-0mA 20 mA
20-4mA 20 mA
+/-10V -10 Vdc
+/-5V -5 Vdc
+/-3V -3 Vdc
+/-2.5V -2.5Vdc
+/-1V -1 Vdc
0 to 5V 0 Vdc
0.5 to 0.5 Vdc
4,5V
0 to 10V 0 Vdc
5 to 0V 5 Vdc
4.5 to 4.5 Vdc
0,5V
the
Upper
level
+20 mA
+20 mA
10 mA
20 mA
20 mA
0 mA
0 mA
4 mA
+10 Vdc
+5 Vdc
+3 Vdc
+2.5 Vdc
+1 Vdc
5 Vdc
4.5 Vdc
10 Vdc
0 Vdc
0.5 Vdc
225