2
System Overview
2.1
Display And Status Indicators
Display
2.2
Hardware Interfaces (Terminals)
37535B
This chapter provides a basic overview of the genset control unit.
Refer to the comprehensive chapters indicated below to commis‐
sion the control unit:
Ä Chapter 3 "Installation" on page 31 provides information
n
on how to mount the unit and setup connections.
Ä Chapter 4 "Configuration" on page 85 provides information
n
on basic setup and reference information on all configurable
parameters.
Ä Chapter 5 "Operation" on page 331 provides information on
n
how to access the unit via the front panel or remotely using the
ToolKit software provided by Woodward.
Ä Chapter 6 "Application" on page 359 provides application
n
examples as well as instructions for the corresponding required
configuration.
Ä Chapter 7 "Interfaces And Protocols" on page 451 provides
n
reference information on the usage of the interfaces and proto‐
cols provided by the control unit.
The display (Fig. 4) as part of the easYgen is used for direct
access to status information and configuration.
Fig. 4: Display
The easYgen-2200/2500 (Fig. 5) provides the following terminals.
easYgen-2200/2500 | Genset Control
For information on the usage of the graphical user
interface refer to Ä Chapter 5.2 "Front Panel Access"
on page 340.
System Overview
Hardware Interfaces (Termina...
27