Protective Equipment And Tools - Woodward easYgen-2000 Series User Manual

Notes on marine usage
1.4.4

Protective Equipment And Tools

Protective gear
37535B
For additional information on how to prevent damage
to electronic components caused by improper han‐
dling, read and observe the precautions in:
"Woodward manual 82715, Guide for Handling and
–
Protection of Electronic Controls, Printed Circuit
Boards, and Modules".
Marine usage of the easYgen genset control requires additional
precautions as listed below:
The specified marine approvals are only valid for
plastic housing units, if they are installed using the
screw kit.
Use all 8 screws and tighten accordingly.
–
The easYgen-2000 Series has no internally isolated power
n
supply.
NOTICE!
Malfunctions due to insufficient protection against
electromagnetic interference
Exposure electromagnetic interference may cause
malfunctions or incorrect internal readings.
– Install an EMI filter (i.e. SCHAFFNER - FN
2070-3-06) for the power supply inputs when using
the control unit in marine applications.
Some additional, independent safety and protection
devices are necessary to meet safety requirements of
Rules and Regulations of marine Classification Soci‐
eties.
Please refer to the corresponding documents
–
issued by marine Classification Societies for the
applicable reqiurements.
The easYgen is type approved by LR Lloyd's Register.
Please consider for final functional arrangements
–
to comply with appropriate Lloyd's Register Rules
as subject of the Plan Approval process.
Personal protective equipment serves to protect risks to the safety
and health of persons as well as to protect delicate components
during work.
Certain tasks presented in this manual require the personnel to
wear protective equipment. Specific required equipment is listed in
each individual set of instructions.
easYgen-2200/2500 | Genset Control
General Information
Safety > Protective Equipment And T...
25