Woodward easYgen-2000 Series User Manual page 443

Modbus Applications > Changing Parameter Settings > Configuration Of LogicsMan...
Example
Word 0 Word 1
Delay ON Delay OFF
3.00 sec 10.00 sec
012c (hex) 03E8 (hex)
37535B
The remote request may be enabled by setting bit 0 (start) of the
remote control word 503 to HIGH and may be disabled by setting
bit 1 (stop) of the remote control word 503 to HIGH (refer to
Ä Chapter 9.2.3 "Additional Data Identifier" on page 527 ).
Fig. 228: LogicsManager function sample 12120
To configure the "Start req. in AUTO" LogicsManager function
(parameter
Modbus message must be sent to the easYgen:
Word 2
Logic equation 1*
Sig Oper‐ Sign Oper‐
n 1 ator 1 2 ator 2
Or False Or
¾
1 2 3 2
easYgen-2200/2500 | Genset Control
12120 Ä p. 246) as indicated in (Fig. 228) the following
Word 3
Logic equation 2*
Sig -/- -/- -/-
n 3
00 00 00
¾
1 0 0 0
Application
Word 4 Word 5 Word 6
Command Command Command
1 2 3
No. 09.02 No. 00.08 No. 04.13
ID = ID = ID =
520 dec 7 dec 251 dec
0208 (hex) 0007 (hex) 00FB (hex)
443