Woodward easYgen-2000 Series User Manual page 5

Scope of delivery
Fig. 3: Scope of delivery - schematic
A easYgen-2200/2500 genset control
B Product CD (configuration software and manual)
Save/load *.WSET file
37535B
easYgen-2000 Series
MPU input
Discrete inputs
Relay outputs
Analog inputs
Analog outputs
CAN bus interfaces
RS-485 interface
The MPU input (if available) or an external ECU
1
signal can be used as speed source.
The following parts are included in the scope of delivery. Please
check prior to the installation that all parts are present.
C
D
To create a *.WSET file with ToolKit
("Save from Device to File") please use the US version
of the *.WTOOL file. This must be done this way for
devices running software version 1.00xx.
Failure to do so causes problems to import the
*.WSET file via ToolKit ("Load Settings File to Device")
if the device is running software version 1.01xx or
higher.
Please refer to Ä Chapter 5.1.2 "Install ToolKit Config‐
uration Files" on page 333 for details.
easYgen-2200/2500 | Genset Control
easYgen-2200
Package P1 Package P2
1 --- 1
3
8 8
6 6
3 3
1 1
1 2
--- ---
Clamp fastener installation material - 4x
Screw kit installation material - 8x
Brief Overview
easYgen-2500
Package P1
1
3
10
11
4
4
2
1
5