Woodward easYgen-2000 Series User Manual page 437

Modbus Applications > Changing Parameter Settings > Configuration Of LogicsMan...
Write the Modbus message (step 3)
Word 0 Word 1 Word 2
Delay ON Delay OFF Logic equation 1
low high low high Sign
byte byte byte byte 1
Table 89: 7 words Modbus message in detail
37535B
Signs
Table 88: Hex code equivalents of the logic equations' nibbles
Copy the complete message of 7 words to the address
[parameter number +1] in one step.
Word 3
Logic equation 2
Oper‐ Sign Oper‐ Sig
ator 1 2 ator 2 n 3
easYgen-2200/2500 | Genset Control
Operators
"XOR"
"NOT-XOR"
The hex code of words 2 and 3 is taken "as is" ¾ don't
swap high byte an d low byte.
It may be necessary to shift the address by 1
depending on the software you use for Modbus com‐
munication.
Word 4
Command
1
0x00 0x00 0x0 low high
0 byte byte
Application
4
5
Word 5 Word 6
Command 2 Command 3
low high low high
byte byte byte byte
437